GMP CLass 10000 Cleanroom Decontamination Air Shower With H13 HEPA Filter

GMP CLass10000 Cleanroom Decontamination Air Showers With H13 HEPA Filter  

 
 
Characteristic For Cleanroom Air Shower :
 
A: High velocity shower jets in excess of 20 m/s ensure efficient scrubbing action to remove particulate matter.
B: Programmable operating modes
C: Solid state programmable microprocessor based controls for various operating parameters
D: Fully washable pre-filters remove around 85% of particulate matters, therefore reducing the load on E: HEPA filters and increasing their efficiency and life span, Highly efficient HEPA filters with around 99.99% filtration efficiency for removing particles as small as 0.3 microns and larger.
Floor matting operated switch for sequential operation of the air shower
F: Multidirectional air flow
G: Adjustable air nozzles
H: Permanently lubricated direct drive centrifugal motors and efficient blowers for maintaining appropriate face velocities of the air (6000 ft/min + 20 feet), while producing minimum vibrations and noise (less than 60 db)
I: Indicator lights on both sides of the air shower for regulation of traffic within the cubicle
J: Emergency buttons on both sides of the air shower to prevent accidental lock-outs
K: Interlocked doors minimize any chances of contamination
L: Door interlocks operate on the magnetic system
M: Hinged motor/blower compartment access panels made of coated aluminium
N: Tamper proof junction box, placed on top
Q: Emergency switch off button with audible alarm located within the shower cubicle
 
Parameter for the  Research Institute Cleanroom air shower  :
 

CUSTOMIZABLE SIZES ARE ALSO AVAILABLE

Air Shower Top Darw  :

Cleanroom Air Shower Front Draw :

Stainless Steel Automatic Air Shower Nozzle and HEPA Air filter:

All of equipment is individually factory tested for safety and performance in accordance with international Standards. Each unit is shipped with a documentation outlining the tests undertaken and the unit’s individual results for each unit.
Factory test include:
--appearance testing
--functional test and visual inspection
--electrical safety tests
--air velocity testing
--noise testing
 
Warranty:
Our equipment is warranty for 1 year excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
 
Contact our sales representative for specific warranty details or document request.

semiconductor clean room

lab clean room

GMP CLass 10000 Cleanroom Decontamination Air Shower With H13 HEPA Filter Images